For updating to the latest firmware and getting the most out of Maxwell 2 ANC, please visit the Firmware Updates section on the following page.
Power on Maxwell 2 ANC by holding down the power button on the bottom of the right cup for 3 seconds.
Maxwell 2 ANC will automatically connect to the included dongle when it is both plugged into a compatible device and the switch on the dongle is set to the appropriate selection for that device.
To mute the microphone, use the toggle switch on the bottom of the of the right ear cup (up is Mute On, down is Mute Off).
To adjust the headband strap position, pull the strap off from the posts on either side of the headband. To reattach, align the holes at the appropriate adjustment level and push the headband strap back over the pins.
Click through the table of contents to explore further.
- Getting Started
- Firmware Updates
- ANC - Active Noise Cancellation
- Wireless Dongle Connection
- Bluetooth Connection
- Wired Connections
- Connection Priority
- Maxwell 2 ANC (PlayStation)
- Maxwell 2 ANC (Xbox)
- Game/Chat Mix
- Microphones
- AI Noise Removal
- Sidetone
- Equalizer
- Miscellaneous Controls + LED Indicators
- Customization